1 Install USB driver
A. Download the USB driver from following link
B. Unzip it and then double click the USB_Driver_EN.EXE and following
default step to install the driver.
C, Connect the USB cable now you can connect the Weavefuture Bill Acceptor
USB cable to PC (this cable
is specially made for BB-Bill-Acceptor, do not use it for other device or use other
RS232 cable or USB cable , do so may cause damages) to the PC
D. run the Device manager, Start->Control Panel->System->Hardware->Device
Manger to find the COM port number, it is USB-Serial CH340(COM3) in the
following example. then remember you com port number is
COM3, so you can configure it in the weavefuture kiosk timer software.
2 Install the software.
A. Download software from
you will be informed the detail URL location after you purchase the
B. unzip the downloaded file
internetcafekioskgametimerbillacceptor4.zip to a directory.
C. Run internetcafekioskgametimerbillacceptor4.msi by double click it in the
Windows Explore (not IE)
D. Following the default setting until finished the setup.
E. Reboot your PC after the software installed.
3 Configure the Weavefuture BB-Bill Acceptor com port number and Usage time of PC
Do not change the software's setting from test to production until you
have hardware Weavefuture BB-Bill-Acceptor configured and attached the
its USB Cable and tested successfully,
otherwise it may cause you PC to locked and you have to reinstall
The following Configuration Window show after reboot your PC.
right click on the screen and login as administrator, first time need to
change password (default password is "weavefuturekiosk")
B. the following configuration window appeared after login
Send the Demo ID to firstname.lastname@example.org
ask for license key. Please note the license key is only release once
for the actual PC which you are used for internet kiosk. The first
license with purchasing of BB-Bill-Acceptor is free, if you
change PC then you need to purchase license fee it is US$69 per PC.
This is default setting by click "step1 search and test bill acceptor". If you want to change
check the check box “Make Change” and click “Save Change” after you done
The Com Port default is COM3; you may change it to match your PC’s Com
port in device manager, which attached the Weavefuture BB-Bill-Acceptor.